[ethersex-devel] Piece of hardware compatible with ethersex

[Tecnovillage]

Hello. I would like to follow ethersex mailing list but unfortunately it
is deutsch most of times and i cannot understand :(
However, I would like to share with you a piece of hardware i have
designed [1]. It has ony few i/o but it fits in a 2-modules DIN box.
It has a 485 line, two input and one output. Have been thought for field
bus gateway and/or command or surveillance of one thing.
Cheers,
Alessandro
[1] http://maetech.it/doku.php?id=projects:mini-ethersex-board

[Bastian Bittorf]

Post by Tecnovillage
Hello. I would like to follow ethersex mailing list but unfortunately
it is deutsch most of times and i cannot understand :(
However, I would like to share with you a piece of hardware i have
designed [1]. It has ony few i/o but it fits in a 2-modules DIN box.
It has a 485 line, two input and one output. Have been thought for
field bus gateway and/or command or surveillance of one thing.
Cheers,
Alessandro
[1] http://maetech.it/doku.php?id=projects:mini-ethersex-board

your link does not work, but this:

http://www.maetech.it/doku.php?id=projects:mini-ethersex-board

thanks for your input. i'am a native german speaker and also
wondering why this list does not stick to english. Any comments about
this?

about your board: when target are you selecting when compiling an image?

bye, bastian

[Tecnovillage]

Post by Bastian Bittorf

Post by Tecnovillage
Hello. I would like to follow ethersex mailing list but unfortunately
it is deutsch most of times and i cannot understand :(
However, I would like to share with you a piece of hardware i have
designed [1]. It has ony few i/o but it fits in a 2-modules DIN box.
It has a 485 line, two input and one output. Have been thought for
field bus gateway and/or command or surveillance of one thing.
Cheers,
Alessandro
[1] http://maetech.it/doku.php?id=projects:mini-ethersex-board

http://www.maetech.it/doku.php?id=projects:mini-ethersex-board

Sorry you are right! Rewrite rule not written correctly ;)

Post by Bastian Bittorf
thanks for your input. i'am a native german speaker and also
wondering why this list does not stick to english. Any comments about
this?
about your board: when target are you selecting when compiling an image?

I use Pollin Net-Io, because AVR and network controller are the same.
Also Onewire is ready on J2. However you will need to patch for the
RS485 to work (something like pin(RS485TE_USART0, PD3, OUTPUT) would
work *but* I left Driver and Receiver Enables on separate pins).

BTW I see there are Modbus modules in Ethersex, did anyone manage to use
it as a rtu-tcp gateway?